Original
By certification 
DLLY-HYGS462 Constant Pressure Water Supply Training Equipment
Constant pressure water supply training devices can meet the demand of constant pressure water supply,and keep the pressure at the ends (service pressure) in the water supply system pipeline network , the system can forecast setting pressure free,floe at the pumps high efficient area where the maximum lift and minimum lift. Through the pressure transmitter testing pipe pressure and translate into electrical signals sent to the controller, the controller compare,calculate and judge between pressure feedback signal and forecast setting pressure, to determine the operation frequency of frequency pump, one or more pump start-up and stop, so that the system can work normally and smoothly under various working conditions , in order to achieve the biggest energy saving effect.
1. The pressure transmitter: used for testing the constant pressure water tank port pressure, the pressure range that can be measured is 0 ~ 200 Kpa 2. Water level switch: perfect work of the pump, when water level is over-high or over-low increase water pump pressure, set to stop working. 3. Water tank completely protection: terminal set full outlet tube, the biggest limit is to protect the equipment. 4. Manual work drain-pipe : manual valve is used to send all water. 5. The input voltage: the three-phase four-wire, AC380 plus or minus 10% frequency 50 Hz / 60 Hz 6. Environmental temperature: 3 ℃ ~ 45 ℃
7. Capacity: < 5 KVA
Q1：What factors affect the price?
A. The quality of components: All the components we use are real industrial components which under EURO standard.
B. Technic: we pay much attention on the technics and details. Our products meet the requirement of Germany standard
C. Quantity: The price is up to the quantity of each item.
Q2: All equipments are designed by Dolang?
A. Yes. All our equipments are designed by ourselves.
B. The design department including: Electric research design department, Electrical research design department, Mechanical research and design department, Software research design department, Pilot test department and technical documents department.
Q3:Does Dolang have after sales service and training service?
A. After sale service: All our products have one year maintance from the date of pick up except artificial damage.
B. Training: Customer may ask our engineer to training them in their company or come to Dolang for training
Constant pressure water supply training devices can meet the demand of constant pressure water supply,and keep the pressure at the ends (service pressure) in the water supply system pipeline network , the system can forecast setting pressure free,floe at the pumps high efficient area where the maximum lift and minimum lift. Through the pressure transmitter testing pipe pressure and translate into electrical signals sent to the controller, the controller compare,calculate and judge between pressure feedback signal and forecast setting pressure, to determine the operation frequency of frequency pump, one or more pump start-up and stop, so that the system can work normally and smoothly under various working conditions , in order to achieve the biggest energy saving effect.
1. The pressure transmitter: used for testing the constant pressure water tank port pressure, the pressure range that can be measured is 0 ~ 200 Kpa 2. Water level switch: perfect work of the pump, when water level is over-high or over-low increase water pump pressure, set to stop working. 3. Water tank completely protection: terminal set full outlet tube, the biggest limit is to protect the equipment. 4. Manual work drain-pipe : manual valve is used to send all water. 5. The input voltage: the three-phase four-wire, AC380 plus or minus 10% frequency 50 Hz / 60 Hz 6. Environmental temperature: 3 ℃ ~ 45 ℃
7. Capacity: < 5 KVA
Q1：What factors affect the price?
A. The quality of components: All the components we use are real industrial components which under EURO standard.
B. Technic: we pay much attention on the technics and details. Our products meet the requirement of Germany standard
C. Quantity: The price is up to the quantity of each item.
Q2: All equipments are designed by Dolang?
A. Yes. All our equipments are designed by ourselves.
B. The design department including: Electric research design department, Electrical research design department, Mechanical research and design department, Software research design department, Pilot test department and technical documents department.
Q3:Does Dolang have after sales service and training service?
A. After sale service: All our products have one year maintance from the date of pick up except artificial damage.
B. Training: Customer may ask our engineer to training them in their company or come to Dolang for training
